Session Index
Key for Identifier: O = Oral
P = Poster
PL=Plenary
I  = Invited               First dash number = Session #
C = Contributed       Last dash number = Order of Presentation
Identifier First Author Title E-MAIL
OI-1-1 Tillack, M. ARIES -- An Integrated Assessment of Chamber Concepts for Inertial Fusion Energy mtillack@ucsd.edu
OC-1-2 Mau, T. K. Modeling of Mirror Surface Damage Effects on  Beam Performance in a Laser-Driven IFE Power Plant mau@fusion.ucsd.edu
OC-1-3 Goodin, D. T. Mass-Production Of IFE Targets Using Fluidized Beds goodin@fusion.gat.com
OC-1-4   WITHDRAWN  
OC-1-5 Cadwallader, L. Preliminary Identification of Accident Initiating Events for IFE Power Plants lcc@inel.gov
OC-1-6 Nikroo, A. Fabrication of Direct and Indeirect Drive Inertial Confinement Fusion Targets Using Glow Discharge Polymerization Nikroo@gat.com
OI-2-1 Lohr, J. ECH Comes of Age for Magnetic Fusion Research lohr@fusion.gat.com
OC-2-2 Ellis, R.A. III Design of the P2001 ECH Launcher for D111-D rellis@pppl.gov
OC-2-3 Baxi, C.B. Thermo Mechanical Design of GA ECH Launcher Steering Mirror for Long-Pulse Operation baxi@fusion.gat.com
OC-2-4 Sen, S. Mitigation of ITG Instabilities by Radio Frequency Waves sen@nucleng.kyoto-u.ac.jp
OC-2-5 Ciric, D. Upgrade of the Jet Neutral Beam Heating System dragoslav.ciric@jet.uk
OC-3-1 Gentile, C. Oxidative Tritium Decontamination cgentile@pppl.gov
OC-3-2 Katayama, J. Behavior of Tritium in SiC kadzu@nucl.kyushu-u.ac.jp
OC-3-3 LaMarche, P. Tritium Considerations in the Segmentation of the TFTR Vacuum Vessel plamarche@pppl.gov
OC-3-4 Youssef, M. Z. Comparison of Radwaste Volume and Hazard in LW and Conventional SW Concepts youssef@mail.fusion.ucla.edu
OI-4-1 Damiani, C. The JET EP Project carlo.damiani@jet.efda.org
OI-4-2 Peng, M. NSTX Status and Results mpeng@pppl.gov
OI-4-3 Ishida. S. Recent Results and Future Plan on JT-60U ishida@naka.jaeri.go.jp
OC-4-4 Weng, P. Recent Progress of the  HT-7U Project pdweng@mail.ipp.ac.cn
OI-5-1 Nelson, B.E. Design of the National Compact Stellarator Experiment (NCSX) Core nelsonbe@ornl.gov
OI-5-2 Wukitch, S. Results and Status of the Alcator C-Mod Tokamak hutch@PSFC.MIT.EDU
OC-5-3 Heitzenroeder, P.J. Engineering Status and Plans for FIRE (FIRE) pheitzen@pppl.gov
OC-5-4 Kessel, C. Advanced Tokamak Scenarios for the FIRE Burning Plasma Experiment ckessel@pppl.gov
OC-5-5 Ruzic, D. N. FLIRE - Flowing Liquid Surface Illinois Retention Experiment Design and Operation druzic@uniuc.edu
OI-6-1 Schmidt, J. Fusion Implementation jschmidt@pppl.gov
OC-6-1   WITHDRAWN  
OC-6-2 Chakraborty, A. K. Long Pulse Operation Data of Large Area Cryocondensation Pump for the SST-1 Neutral Beam Injector shiban@ipr.res.in
OC-6-3 Bosia, P. High Power Density Ion Cyclotron Antennas for Next Step Applications bosia@drfc.cad.cea.fr
OC-6-4 Lennholm, M. ECRH Power Injection in TORE SUPRA Lennholm@drfc.cad.cea.fr
OC-7-1 Schuster. E. Nonlinear Burn Control in Fusion Reactors schuster@mae.ucsd.edu
OC-7-2 Bertocchi, A. Migration to a Distributed Control and Data Acquisition System Based on COBRA and SAN/AFS polidoro@frascati.enea.it
OC-7-3 Mizutani, T. Measurements of the Energy Distribution of Fast Excited Atoms by Doppler Shift Spectroscopy in a Spherically Symmetric Inertial-Electrostatic Confinement Fusion Device tosiyuki@iae.kyoto-u.ac.jp
OC-7-4 Yoshikawa, K. Potential Profile Measurements by Laser-Induced Fluorescence Method in a Helium Discharge Plasma kiyoshi@iae.kyoto-u.ac.jp
OI-8-1 Kellman, A. G. Recent Results from the DIII-D Program Kellman@fusion.gat.com
OI-8-2 Bak, J. S. Progress of the KSTAR Tokamak Engineering jsbak@comp.kbsi.re.kr
OI-8-3 Sykes, A. MAST Alan.Sykes@ukaea.org.uk
OC-8-4 Yan, J. Status and Plan of the HL-2A Project zhoucp@swip.ac.cn
OI-9-1 Luckhardt. S. Liquid Lithium Limiter Experiments on CDX-U sluckhardt@ucsd.edu
OC-9-3   WITHDRAWN  
OC-9-4 Chaudhuri, P. Design and Thermal-Hydraulic Analysis of PFC Baking for SST-1 Tokamak paritosh@ipr.res.in
OC-9-5 Skinner, C. Tritium Removal from Plasma Facing Components by a Scanning Laser cskinner@pppl.gov
OC-9-6 Rotti, C. Process Qualification Tests for Fabrication of Heat Transfer Elements shiban@ipr.res.in
PC-1-1 Grimes, M. The Alcator C-Mod Lower Hybrid Current Drive Experiment Transmitter and Power System grimes@cmod.psfc.mit.edu
PC-1-2 Loesser, G. D. Design and Engineering of the Alcator C-Mod Lower Hybrid Current Drive System dloesser@pppl.gov
PC-1-3 Burke, W. The Alcator C-Mod Lower Hybrid Current Drive Experiment Low Power Microwave and Active Control System dterry@cmod.psfc.mit.edu
PC-1-4 Titus, P. H. Disruption Load Calculations using ANSYS Transient Electromagnetic Simulations for the Alcator C-Mod Antennas titus@psfc.mit.edu
PC-1-5 Zaks, J. Inner Divertor Detailed Design and Manufacturing zaks@psfc.mit.edu
PC-1-6 Doan, K. H. The D111-D Neutral Beam Scada Workstation Upgrade doan@fusion.gat.com
PC-1-7 Hong, R. Effects of Operating Parameters on the Beam Species of DIII-D Neutral Beam Ion Sources hong@fusion.gat.com
PC-1-8   WITHDRAWN  
PC-1-9 Fu, P. The Poloidal Power Supply System of HT-7U Superconducting Tokamak fupeng@mail.ipp.ac.cn
PC-1-10 Liu, Z.Z. The Design of Reactive Power Compensation and Harmonic Suppression in HT-7U Power Supply System zzliu@mail.ipp.ac.cn
PC-1-11   WITHDRAWN  
PC-1-12   WITHDRAWN  
PC-1-13 Meloni, P. Post-test Calculations by Means of ISAS-ITER System for ICE Experiments meloni@bologna.enea.it
PC-1-14 Sandri, S. Reduction of the Collective Dose Due to the Working Activities at the Water Cooling System of the Last ITER Kind Project sandri@frascati.enea.it
PC-1-15 Ahn, H. J. Seismic Analysis of the KSTAR Tokamak hjahn@hhi.co.kr
PC-1-16 Baruah, U.K. Plasma Density Control for the Ion Source of a Long Pulse Positive Ion Neutral Beam Injector ujjwal@ipr.res.in
PC-1-17 Ciric, D. Influence of Accelerator Grid Misalignment on Multi-Aperture Particle Beam Properties dragoslav.ciric@jet.uk
PC-1-18 Cox, S. Operating Limits of the Upgraded Jet Neutral Beam Injector from Duct Re-Ionization and Beam Shine-Through stephen.cox@jet.uk
PC-1-19 Jayakumar, P.K. Thermo-Structural Assessment of Proposed Grid for 1000S Neutral Beam Ion Source jay@ipr.res.in
PC-1-20 Patel, P. J. A Fast Dynamic Discharge Power Supply for Long Pulse Neutral Beam Injector paresh@ipr.res.in
PC-1-21 Martin, D. A New Box for the JET Facility's Upgraded Neutral Beam Injection System david.martin@jet.uk
PC-1-22 Surrey, E. Properties of the JET 130kV/60A Positive Ion Neutral Injector elizabeth.surrey@jet.uk
PC-1-23 Kugel, H. Neutral Beam Injection Requirements and Design Issues for the National Compact Stellarator Experiment hkugel@pppl.gov
PC-1-24 Ramakrishnan,R. NCSX Electrical Power Systems sramakr@pppl.gov
PC-1-25   WITHDRAWN  
PC-1-26   WITHDRAWN  
PC-1-27 Combs, S. Flexible Pellet Injection System for Plasma Fueling Experiments combssk@ornl.gov
PC-1-28 Matsukawa. T. Synchronous Rectifier Using Power-Mosfet for High Current AC/DC Converter System matukawa@nr.titech.ac.jp
PC-1-29 Bernabei, S. A "Third Generation" Lower Hybrid Coupler sbernabe@pppl.gov
PC-1-30 Kushwah, M. Anode Modulator Power Supplies for Continuous Duty 500 KW Klystrons (TH2103D) & 200 KW Gyrotron (VGA8000A19)" srinivas@plasma.ernet.in
PC-1-31 Shukla, B. K. Electron Cyclotron Resonance Frequency System on Tokamak Aditya dbora@ipr.res.in
PC-1-32 Srinivas, Y.S.S. Results of 10-Joule Wire-Burn Test Performed on 70 kV Rail-Gap Crowbar Protection System for High Power Klystrons and Gyrotron dbora@ipr.res.in
PC-1-33 Brunkhorst, C. Models for Automated Tube Performance Calculations cbrunkho@pppl.gov
PC-1-34 Greenough, N. A Multichannel Phase Detector Using Programmable Logic Devices ngreenough@pppl.gov
PC-1-37 Walton, R. C. Mechanical Design of the ICRH Antenna for JET-EP Bob.Walton@jet.uk
PC-1-38 Taylor, N. Safety and Environmental Considerations in the Selection of Fusion Power Plant Design Options neill.taylor@ukaea.org.uk
PC-1-39 Marshall, T. Melcor and Cathare Modeling of the EVITA Experiment marstd@inel.gov
PC-1-40 Lumia. M. Industrial Hygiene Concerns during the Decontamination and Decommissioning of the Tokamak Fusion Test Reactor mlumia@pppl.gov
PC-1-41 Karditsas, P. Temperature Excursions in Bounding Accidents using Finite Element Analysis panos.karditsas@ukaea.org.uk
PC-2-1 Kawamata, Y. Development of Intelligent Long-time Digital Integrator System for Next Generation Tokamaks kawamata@naka.jaeri.go.jp
PC-2-2 Albanese, R. Plasma Modeling for Position and Control in FTU polidoro@frascati.enea.it
PC-2-3   WITHDRAWN  
PC-2-4 Davis, B. Web Interfaces to MDSplus Data wdavis@pppl.gov
PC-2-5 Stillerman, J. A. Compact PCI Based Data Acquisition at Alcator C-Mod jas@psfc.mit.edu
PC-2-6 Delaware, S. W. Embedded Controller and Power Supply System for the New Lithium Ion Beam for the Plasma Edge Current Diagnostic on the D111-D Tokamak delaware @fusion.gat.com
PC-2-7 Makariou, C. C. Upgraded Alignment Control for the D111-D Thomson Laser System makariou@fusion.gat.com
PC-2-8 Ponce, D. D111-D Electron Cyclotron System Status - or Quaisi-Real Time ECH Data Acquisition at D111-D Using Compact PCI Components Dan.Ponce@gat.com
PC-2-10 Cowan, T. Formation of Collimated Ion Beams Using Short-Pulse Lasers rich.stephens@gat.com
PC-2-11 Brown, T. Fusion Ignition Research Experiment Machine Configuration Update tbrown@pppl.gov
PC-2-12 Young, K. Challenges for Plasma Diagnostics in a Next Step Device (FIRE) kyoung@pppl.gov
PC-2-13 Sawan, M. Nuclear Considerations for FIRE sawan@engr.wisc.edu
PC-2-14 Ulrickson, M. Design of the Fusion Ignition Research Experiment (FIRE) Plasma Facing Components maulric@sandia.gov
PC-2-15 Titus, P. H. Alternative Structural Concepts for the Fusion Ignition Research Experiment (FIRE) titus@psfc.mit.edu
PC-2-16 Wu, J. F. Hefei 600-m CICC Jacketing Line jfw@mail.ipp.ac.cn
PC-2-17 Daino, M. Study of Compact Neutron Source using Inertial Electrostatic Confinement Fusion (IECF) daino@iae.kyoto-u.ac.jp
PC-2-18 Wu, S.T. Modification Design of the HT-7U Tokamak Device stwu@mail.ipp.ac.cn
PC-2-19 Sakai, T. Analysis of an Inertial Confinement Fusion Device Using a Particle Code with Monte Carlo Collision Scheme tsakai@iae.kyoto-u.ac.jp
PC-2-20 Coletti, A. AM Laser System (IVVS) for the ITER-FEAT In Vessel Viewing and Ranging polidoro@frascati.enea.it
PC-2-21 Talarico, C. Toroidal Field Model Coil Geometry Survey talarico@frascati.enea.it
PC-2-22 Riva, M. Towards Real Time Control of the Internal Transport Barriers on JET mriva@jet.uk
PC-2-23 Sakasai, A. Engineering Design Study of JT-60 Superconduction Modification sakasai@naka.jaeri.go.jp
PC-2-24 Blanchard, W. Boronization on  NSTX using Deuterated Trimethylboron wblanchard@pppl.gov
PC-2-25 Gibney, T. Software Control of Coil Currents on NSTX tgibney@pppl.gov
PC-2-26 Kalish, M. Design of the NSTX Helium Heating and Cooling System mkalish@pppl.gov
PC-2-27 Mastrovito, D. Residual Gas Analysis Hardware and Software Data Acquisition System at NSTX dmastovito@pppl.gov
PC-2-28 Roney,P. Computer and Network Infrastructure of NSTX proney@pppl.gov
PC-2-29 Sengupta, S. The NSTX Trouble Reporting System ssengupta@pppl.gov
PC-2-30 Sichta, P. Status of the Experimental Physics Industrial Control System at NSTX psichta@pppl.gov
PC-2-31 Lewicki, B. The Pegasus Toroidal Experiment Facility lewicki@engr. Wisc.edu
PC-2-32 Nelson, B.E. Design of the Quasi-Poloidal Stellarator Experiment (QPS) nelsonbe@ornl.gov
PC-2-33 Asaoka, Y. Design Optimization for Commission of a DT Fusion Reactor without External Supply of Tritium asaoka@criepi.denken.or.jp
PC-2-34 Sheffield, J. Reference Scenario for an Advanced Deuterium Power Plant System oji@ornl.gov
PC-2-35 Bedakihale, V. M. Manufacturing of SST-1 Toroidal Field Magnetic Coils and Its Structure vijayb@iname.com
PC-2-36 Doshi, B. Assembly, Integration and Dimensional Control of the Steady State Tokamak SST-1 doshi@ipr.res.in
PC-2-37 Rao, N. V. M. Comparison of Predictions of Finite Element Structure Analysis with Performance Data of Fabricated Large Rectangular Test Stand for NBI for SST-1 shiban@ipr.res.in
PC-2-38 Nath. T. R. Fabrication of SST-1 Prototype Vacuum Vessel and Cryostat trn@ipr.res.in
PC-2-39 Sichta, P. Upgrade to the Tritium Remote Control and Monitoring System for the TFTR D&D psichta@pppl.gov
PC-2-40 Blaumoser, M. Status, Operation and Maintenance of the Spanish Stellarator TJ-11 martin.blaumoser@ciemat.es
PC-2-41 Feist, J-H. Dr. Status of Wendelstein 7-X Construction feist@ipp.mpg.de
PC-2-42 Sen, S. Mitigation of Low Frequency Oscillations by Parallel Inhomogeneous Flow Induced by Neutral Beam sen@nucleng.kyoto-u.ac.jp
PC-2-43 Kung, C. Compact Probe Design for Power Monitoring from the Narrow Side of the Reduced Waveguide ckung@pppl.gov
PC-2-44 Zaghloul, M. Sensitivity of Metal Mirrors to Laser-Induced Damage under Long-Term Exposure at Shallow Angle of Incidence zaghloul@fusion.ucsd.edu
PC-3-1 Titus, P. H. Alcator C-Mod Inner Divertor Upgrade Design and Analysis titus@psfc.mit.edu
PC-3-2 Friend, M. Thermal Analysis and Extended Operation Simulation of the D111-D Toroidal Field Coil Belt Bus System friend@fusion.gat.com
PC-3-3 Litunovsky, V. Study of Plasma-Material Interaction in Disruption Simulation Experiments with Variable Target Inclination vlitun@niiefa.spb.su
PC-3-4 Majeski, R. A Toroidal Liquid Lithium Limiter for CDX-U rmajeski@pppl.gov
PC-3-5 Nygren, R. E. High Heat Flux Tests of Carbon Composites for KSTAR and NSTX renygre@sandia.gov
PC-3-6 Portafaix, C. Design and Manufacturing of the Toroidal Pump Limiter-Start Up Version of the Ciel Project porta@pegase.cad.cea.fr
PC-3-7 Pulsifer, J. Structured Porous Media for High Heat Flux Fusion Applications pulsifer@fusion.ucsd.edu
PC-3-8 Ricapitro, I. Impact of Low Performance Tritium Barriers on the Water Cooled Lithium-Lead Blanket ricapito.brasimone@enea.it
PC-3-9 Shibata. T. Advanced Material Tokamak Experiment (AMTEX) on JFT-2M Design, Fabrication, Installation and Conditioning of Inner Ferritic Steel Wall shibata@axjft3.tokai.jaeri.go.jp
PC-3-10 Youchison, D. Advances in Tungsten-Armored Plasma Facing Components dlyouch@sandia.gov
PC-3-11 Ochiai, K. Verification of the Tritium production Rate for the F82H/ enriched Li2TiO3/Berylium assembly ochiai@fnshp.tokai.jaeri.go.jp
PC-3-12 Liao, Z.Y. The Design of HT-7U Thermal Shield System pdweng@mail.ipp.ac.cn
PC-3-13 Kaita, R. Modeling of Spherical Torus Plasmas for Liquid Lithium Wall Experiments rkaita@pppl.gov
PC-3-14 Xiao, B. Thermal Performance of TF Coils in HT-7U Devices bjxiao@mail.ipp.ac.cn
PC-3-15   WITHDRAWN  
PC-3-16 Yu, J. Structural Analysis and Preliminary Design of the HT-7U Cryostat yujie@mail.ipp.ac.cn
PC-3-17 Weiyue, W. The Engineering Design of the Poloidal Field System of HT-7U wuwy@mail.ipp.ac.cn
PC-3-18 Song, Y. Stress Analysis and Experiment Research of the Welded Bellows songyt@mail.ipp.ac.cn
PC-3-19 Zhu, Y. Determination of The CICC Joint-Length yhzhu@mail.ipp.ac.cn
PC-3-20   WITHDRAWN  
PC-3-21 DiMaio, P. On the Thermal Conductivity of Single Size Beryllium Pebble Beds vella@din.din.unipa.it
PC-3-22 Riccardo, V. Disruption Design Criteria for Jet In-Vessel Components valeria.riccardo@jet.uk
PC-3-23 Yagyu, J. Boronization Using Deuterated-decaborane on JT-60U yagyu@naka.jaeri.go.jp
PC-3-24 Cho, S. KSTAR Vacuum Vessel Shield Analysis sycho@comp.kbsi.re.kr
PC-3-25 Her, N.I. Structural Design and Analysis for KSTAR Cryostat hni@comp.kbsi.re.kr
PC-3-26 Oh, Y-K Design Overview of KSTAR Magnet Structures ykoh@kbsi.re.kr
PC-3-27 Bromberg, L. ARIES-AT Magnet Systems fdahlgren@pppl.gov
PC-3-28 Bromberg, L. Testing and Benchmarking of Electrical Insulators for Fusion Applications brom@psfc.mit.edu
PC-3-29 Maday, F. M. Mechanisms Governing Fracture of Cyclically Loaded F82H Steel in Air and Water at 240 C francoise.maday@casaccia.enea.it
PC-3-30 Voss, G. Development of a High Field Solenoid Magnet for the Mast Spherical Tokamak garry.voss@ukaea.org.uk
PC-3-31 Neumeyer, C. Spherical Torus Magnet Design cneumeyer@pppl.gov
PC-3-32   WITHDRAWN  
PC-3-33 Toribio, J. Image Analysis Evaluation of Hydrogen Degradation in 316L Austenitic Stainless Steel toribio@usal.es
PC-3-34 Brooks, A. Design of Trim Coils for Magnetic Island Suppression in the National Compact Stellarator Experiment abrooks@pppl.gov
PC-3-35   WITHDRAWN  
PC-3-36 Williamson, D. Design and Analysis of the Modular Coils for the National Compact Stellarator Experiment (NCSX) williamsonde@ornl.gov
PC-3-37 Chaudhuri, P. Study of Thermal-Hydraulic Design of Water Cooled PFC for SST-1 Tokamak paritosh@ipr.res.in
PC-3-38   WITHDRAWN  
PC-3-39   WITHDRAWN  
PC-3-40 Chrzanowski, J. NSTX Coil Systems - Maintenance and Repair Experiences jchrzanowski@pppl.gov
PC-3-41 Bruce, R. L. Polymer - Derived SiCf/CiCm Composite Fabricaition and Microwave Joining for Fusion Energy Applications rlbruce@fm-technologies.com
PL-I-1 Davies, A. DOE OFES Under the New Administration  
PL-I-2 Aymar, R. Toward ITER Construction aymarr@itereu.de
PL-I-3 Sethian, J. Direct Drive Laser Inertial Fusion Energy sethian@this.nrl.navy.mil
PL-II-4 Meade, D. FIRE, Exploring the Frontiers of Burning Plasma Science dmeade@pppl.gov
PL-II-5 Najmabadi, F. Impact of Advanced Physics and Technology on the Attractiveness of Tokamak Fusion Power Plants najmabadi@fusion.ucsd.edu
PL-III-6 Mito, T. Design, Development and Operation of Superconducting System for LHD mito@LHD.nifs.ac.jp
PL-III-7 Friedberg, J. Report of The FESAC Panel on Burning Plasmas freidberg@psfc.mit.edu
PL-III-8 Sauthoff, N Snowmass 2002: The Fusion Energy Sciences Summer Study nsauthoff@pppl.gov
PL-IV-9 Casazza, J. Electric Utilities Deregulation and Its Implications ameredinst@erols.com
PL-IV-10 Federici. G. Selection of Plasma-Facing Materials in Next-Step Devices federici@post.rzg.mpg.de
PL-IV-11 Olson, C. Z-Pinch IFE clolson@sandia.gov
PL-V-12 Zinkle, J. S. Advanced Materials For Fusion Technology zinklesj@ornl.gov
PL-V-13 Waldron, W ENGINEERING AND ENABLING TECHNOLOGY DEVELOPMENT FOR HEAVY ION FUSION DRIVERS WLWaldron@lbl.gov
PL-V-14 Moses, E. Technology of the National Ignition Facility moses1@llnl.gov
Return Home