ES&H Directives 

ESHD 5008 Table of Contents (click to jump to a section)

Section 0.0 - Preparation, Review and Approval of ES&H Directives
Section 1.0 - Construction Safety
Section 2.0 - Electrical Safety
Section 3.0 - Laser Safety
Section 4.0 - RF, Microwave & Magnetic Safety
Section 5.0 - Fire Protection
Section 6.0 - Nuclear SafetyCanceled
Section 7.0 - Waste Management
Section 8.0 - Industrial Hygiene
Section 9.0 - Occupational Safety
Section 10.0 - Radiation Safety
Section 11.0 - Operations Hazard Criteria and Safety Certification
Section 12.0 - Environmental Protection

(Section Responsibility-Jim Graham, Status - Next Review Due February 2009)

(Section Responsibility-Jerry Levine, Status - Next Review Due January 2010)

(Section Responsibility-Jerry Levine)

• Chapter 1 - Introduction, - Rev. 6  3/14/08
  
(Status-Next Review due March 2011)


• Chapter 2 - Definitions and Responsibilities, - Rev. 8 7/7/05
  
(Status-Next Review due July 2008)


• Chapter 3 - General Requirements, - Rev. 10 6/12/06  TCR-Section 2, Chapter 3,R10-001
(Status-Next Review due Jan 2010)


• Chapter 4 - Isolation of Hazards, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 5 - Personnel-Safety-Interlock Systems, - Rev. 7 7/7/05  TCR-Section 2, Chapter 5, R7-001
  
(Status-Next Review due April 2011)


• Chapter 6 - Capacitors and Capacitor Banks, - Rev. 9 10/29/07
(Status-Next Review due October 2010)


• Chapter 7 - Electrical Conductors and Connectors, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 8 - Enclosures for Electrical Equipment, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 9 - Inductors and Electromagnets, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 10 - Instrumentation and Control Systems, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 11 - Power Supplies, - Rev.5 7/7/05
(Status-Next Review due July 2008)


• Chapter 12 - Resistors, - Rev. 5 07/23/02
(Status-Next Review due July 2008)


• Chapter 13 - Specialty Switches, - Rev. 5 7/7/05
(Status-Next Review due July 2008)


• Chapter 14 - Battery Banks, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 15 - Live-Line Tools & Temporary Grounding Devices, - Rev. 6 7/7/05
(Status-Next Review due July 2008)


• Chapter 16 TCR-001 - References, - Rev. 6 7/7/05 TCR-Section 2, Chapter 16,R6-001
(Status-Next Review due January 2010)


• Chapter 17 - Attachments A through J, - Rev. 5 2/25/05
  
(Status-Next Review due Mar 2011)
These Attachments are not a part of the requirements of this Section 2.0, They are included for information purposes. However, each Appendix illustrates methods that have been acceptable in the past of fulfilling some of the requirements in Section 2.0 .
• Attachment A - Examples of acceptable isolation techniques
• Attachment B - Isolation diagram - The Isolation Diagram illustrates some acceptable safety practices and procedures which are not intended to be restrictive. Alternate methods may be used as long as they meet the requirements of Section 2.0.
• Attachment C - Form no. 5008.2-1 - Permit for climbing or walking on cable trays
• Attachment D - Form no. 5008.2-2 - CBI - capacitor bank (CB) inspection form
• Attachment E - Electric arc burns
• Attachment F - Pressures developed by ac electric arcs
• Attachment G - Sample calculations of flash protection boundary
• Attachment H - Sample calculations of enclosed ac arc overpressures
• Attachment I - Development of PPPL electrical safety criteria
• Attachment J - Energized Elecrtical Work Permit

(Section Responsibility-Jerry Levine, Status-Next Review due Mar 2011)

Includes appendices and tables:
• Outline for Laser Safe Operating Procedures
• The Laser Pointer
• Control Measures for the Four Laser Classes
• Laser - Danger and Caution Signs

(Section Responsibility-Jerry Levine, Status-Next Review due Aug 2007)

• Chapter 1 - Fire Protection Overview - Rev. 3 02/15/99
(Responsibility-Shawn Connolly, Status-Next Review due February 2009)


• Chapter 2 - Management and Administration - Rev. 3 11/20/98    TCR-Section 5, Chapter 2,R3-001
(Responsibility-J.W. Anderson, Status-Next Review due February 2009)


• Chapter 3 - Fire Protection Engineering - Rev. 4 1/31/06
(Responsibility-Shawn Connolly, Status-Next Review due January 2009)


• Chapter 4 - Environmental and Public Protection - Rev. 2 10/01/92
(Responsibility-John Bavlish, Status-Next Review due Feb 2009)


• Chapter 5 - Fire Safety Assessments - Rev. 3 6/14/05
  
(Responsibility-John Bavlish, Status-Next Review due April 2011)


• Chapter 6 - Fire Department Operations - Rev. 3 6/14/05
(Responsibility-John Bavlish, Status-Next Review due June 2008)

• Chapter 7 - Fire Prevention Practices - Rev. 0 1/31/06
(Responsibility-Shawn Connolly, Status-Next Review due January 2009)

• Chapter 8 - Egress and Fire Protection Equipment - Rev. 0 1/31/06
(Responsibility-Shawn Connolly, Status-Next Review due January 2009)

• Chapter 9 - Fire Protection For Special Hazards - Rev. 0 1/31/06
(Responsibility-Shawn Connolly, Status-Next Review due January 2009)

• Appendix A
• Table 1 - Automatic Fire Protection Systems - Rev. 5 12/2/05
  
(Responsibility-Shawn Connolly Status-Next Review due Dec 2008)


• Table 2 - Fire Protection Responsibilities (CANCELED)
(This Table has been canceled as of 11/20/98. Responsibilities are now included in Chapter 2 of this Section)


• Table 3 - PPPL Occupancy Classifications - Rev. 4 12/2/05
  
(Responsibility-Shawn Connolly, Status-Next Review due Dec 2008)


• Table 4 & 5 - Fire Protection Exemptions and Equivalencies (CANCELED)
(These Tables have been canceled as of 12/2/05 since they are no longer relevant)

• Table 6 - Fire Protection Systems Inspections, Testing, & Maintenance Frequencies (CANCELED)
(This Table has been canceled as of 02/15/99. Information was either redundant or inappropriate for the ESHD Manual)


• Table 7, page 1 thru page 4 - Self-Appraisal Frequencies - Rev. 2 10/01/92
(This Table has been canceled as of 7/6/06.)

(Section Responsibility-Rob Sheneman, Status-Next Review due June 2010)

(Section Responsibility-Jerry Levine)

• Chapter 1 - Chemicals - Rev. 4  3/25/08
  
(Status-Next Review due March 2011)


• Chapter 2 - Carcinogens - TCR-001 of Rev. 3 10/21/98
(Status-Next Review due March 2011)


• Chapter 3 - Chemical in Laboratories - TCR-001 of Rev. 1 11/09/98
(Status-Next Review due February 2010)


• Chapter 4 - Ventilation - Rev. 3 11/05/98
(Status-Next Review due March 2011)


• Chapter 5 - Confined Spaces - Rev. 5 4/30/07
  
(Status-Next Review due April 2010)


• Chapter 6 - Personal Protective Equipment - TCR-002 effective 3/24/08 of Rev. 2
  
(Status-Next Review due March 2011)
• Table of Filter Lenses recommended for welding and laser use

• Chapter 7 - Respiratory Protection - Rev. 4 1/25/07
  
(Status-Next Review due January 2010)


• Chapter 8 - Noise Control and Hearing Conservation - Rev. 5 1/6/06
  
(Status-Next Review due January 2009)


• Chapter 9 - Housekeeping and Sanitation - TCR-001 of Rev. 2 01/13/99
  
(Status-Next Review due March 2011)


• Chapter 10 - Training - Rev. 2 11/12/98
  
(Status-Next Review due March 2011)


• Chapter 11 - Thermal Stress - Rev. 1 11/05/98
  
(Status-Next Review due March 2011)


• Chapter 12 - Hazard Communication - Rev. 1 12/16/98 including
  
(Status-Next Review due February 2008)
• Location of Right-To-Know Information Stations
• How to use a Material Safety Data Sheet (MSDS)
• Basic Hazard Communication Training Outline
• Glossary Of Terms
• References
• 
  
• Chapter 13 - ES&H Review of Procurements - Rev. 1 9/28/02
  
(Status-Next Review due September 2005)

(Section Responsibility-Jerry Levine)

• Chapter 1 - Personal Protective Equipment - Rev. 2 06/28/00
(Status-Next Review due March 2011)


• Chapter 2 - Compressed Gas Cylinder Safety - Rev.3 02/16/07
  
(Status-Next Review due Feb 2010)


• Chapter 3 - Cryogenic Safety - Rev. 2 06/28/00
(Status-Next Review due March 2011)


• Chapter 4 - Manual Lifting - Rev. 2 06/28/00
(Status-Next Review due March 2011)


• Chapter 5 - Portable Ladders, Platforms, and Scaffolds - TCR-001 of Rev. 4 09/20/04
(Status-Next Review due March 2011)


• Chapter 6 - Machine Guarding - Rev. 2 06/28/00
(Status-Next Review due March 2011)


• Chapter 7 - Machine Tools - Rev. 2 06/28/00
(Status-Next Review due March 2011)


• Chapter 8 - Forklifts, Work Platforms, and Special Purpose Vehicular Requirements - Rev. 3 1/26/07
(Status-Status-Next Review due January 2010)


• Chapter 9 - Office Safety - TCR-002 of Rev. 2 10/04/00
(Status-Next Review due March 2011)


• Chapter 10 - Accident Investigation - TCR-002 of Rev. 2 effective 3/6/02
  
(Status-Next Review due January 2010)


• Chapter 11 - Pressure Systems - Rev. 3 1/25/07
  
(Status-Next Review due January 2010)


• Chapter 12 - Safe Use of Tools - Rev. 3 12/6/05
(Status-Next Review due December 2008)


• Chapter 13 - Working Alone - Rev. 2 10/04/00 (Next Review due October 2003)This Chapter has been superseded by Policy P-017 "Working Alone"

• Chapter 14 - Vacuum Windows - TCR-001 of Rev. 2 06/27/00
(Status-Next Review due March 2011)


• Chapter 15 - Welding, Cutting, and Other Hot Work - TCR-002 of Rev. 2 9/16/05
  
(Status-Next Review due January 2010)


• Chapter 16  - Fall Protection - TCR-001 of Rev. 0 08/29/01
  
(Status-Next Review due February 2010)

(Section Responsibility-Jerry Levine, Status-Next Review due Nov 2008)

Radiation Safety Tables (Link to Appendices A-E of 10 CFR Part 835, which also serve as the Appendices to this Section 10)

(Section Responsibility-Jerry Levine)

• Chapter 1 - Operations Hazard Criteria - TCR-001 of Rev. 4 5/21/02 (this Chapter Superseded ESHD5003) (Status-Next Review due March 2011)

• Chapter 2 - Safety Certification System - Rev. 0 01/29/99 (this Chapter Superseded gD5004) (Status-Next Review due March 2011)

(Section Responsibility-Rob Sheneman, Status-Next Review due June 2010)

This page last revised by Jim Graham on 4/17/08.